Table of Contents
Advertisement
E-MON CLASS 3400 METER
Use the following procedure to replace the battery cell
1. Disconnect power from the meter at the unit external circuit breaker.
2. Remove the battery from its holder and place on a non-conductive surface.
3. Install new battery into the battery holder.
NOTE: Care should be taken to insure that the replacement battery is installed
the same polarity as the battery that was removed. No damage to unit or
battery will occur if battery is inadvertently installed in the wrong direc-
tion.
4. Dispose of the used battery in accordance with the manufacturers' (Pana-
sonic) instructions.
62-0398—02
+
Fig. 21. Lithium Battery Cell.
36
–
BATTERY
M33278
Hide quick links:
Advertisement
Table of Contents
