Download  Print this page

Safety Label Definitions And Information - Honeywell 3400 Installation Instructions Manual

E-mon series, advanced kwh/demand meter with communications.
Hide thumbs

Advertisement

4.0 SAFETY LABEL DEFINITIONS AND
INFORMATION
The E-Mon Class 3400 Meter may contain one or more of the following labels.
Operator(s) should familiarize themselves with the meaning of each label to
minimize risk.
FCC
Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Standards Compliance:
BACnet MS/TP and IP protocol is BTL listed.
LonWorks TP/FT-10 protocol is LonMark® certified.
The presence of this label is a cautionary indicator identifying a
danger risk. The manual should be consulted prior to proceeding.
The presence of this label indicates an electrical shock hazard
exists in the location or area where the label is placed. Prior to
proceeding, the MAINS power must be disconnected and the
manual consulted for safety information.
11
E-MON CLASS 3400 METER
62-0398—02

Advertisement

   Related Manuals for Honeywell 3400

Comments to this Manuals

Symbols: 0
Latest comments: