Altitude Calibration
With connection to Internet, Bryton Mobile App provides altitude information for you to calibrate
directly. You can also change altitude manually.
1. Pair Rider 450 with Bryton Mobile App
a. Go to Settings > General > Bluetooth to turn on Bluetooth on Rider 450 .
b. Go to your phone "Settings>Bluetooth" and enable Bluetooth.
c. Go to Bryton Mobile App and tap "Settings>User Settings>Device Manager".
d. Tap "+" and choose "Bluetooth 4.0".
e. Select and add your device by pressing "+".
f. Tap "Pair" to pair your device with your phone. (For iOS phone only)
g. Tap "Finish" to complete pairing.
2. Calibrate Your Altitude
a. Tap "Alt. Cal" in Bryton Mobile App.
b. Tap "Allow" to enable Bryton Mobile App to use current location for altitude information.
c. Bryton Mobile App shows altitude of your current location. you can also make manual changes
by pressing
d. Tap "Calibrate" to make change as suggested.
e. Bryton Mobile App scans for available devices. Tap "OK" to connect to Rider 450 .
f. Tap "OK" to calibrate altitude data for your device.
g. "Calibration Successful" shows up. Tap "OK" to con rm.
or tap on the number to input manually.
Bryton App
41