Advertisement
Chapter 2
Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
c.
Note
Figure 2-7
Inserting the Camera Processor Into the Light Reflector
OL-24695-01
Attach the USB type B and DVI cables to the processor. These cables are already connected to the
light reflector.
The DVI cable is tied to the light reflector with a cable tie to prevent damage during shipping.
Cut the cable tie and release the cable in order to connect it to the camera processor.
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
Assembling the TX1300 47
a
b
c
2-9
Advertisement
