Advertisement
Assembling the TX1300 47
Step 8
Attach the display to the light reflector:
a.
Note
b.
c.
Figure 2-8
Attaching the Display to the Light Reflector
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
2-10
Chapter 2
Hook the display onto the rods in the light reflector.
Hold the bottom of the display slightly forward from light reflector to prevent it from latching
to the light refelector.
Connect the power and signal cables to the back of the display.
Rotate the display downwards until the lower part of the display attaches to the light reflector.
Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
OL-24695-01
Advertisement
