Download Print this page

Cisco TX1300 47 Manual page 11

Telepresence system, freestanding version

Advertisement

Chapter 2
Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
Step 9
Install the camera:
a.
b.
c.
d.
Figure 2-9
Attaching the Camera and Camera Cables to the Light Reflector and Camera Processor
OL-24695-01
Using a #3 allen wrench, loosen the three screws in the camera assembly.
Slide the camera into its attachment point in the reflector.
Secure the camera with the three screws.
Attach the three camera cables to the camera processor. The cables attach to the processor in the
same orientation as they come from the camera; left-most cable to left-most connector, middle cable
to middle connector, and right-most cable to right-most connector.
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
Assembling the TX1300 47
2-11

Advertisement

loading