Cisco TX1300 47 Manual page 17

Chapter 2 Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
Step 11 Attach the speaker cover to the system. Tuck the foam tabs on the top of the speaker cover into the space
in the cabinet behind the speaker cover.
Figure 2-14 Attaching the Speaker Cover
Retrieve the compliance label and codec cabling diagram from the accessory kit; then, attach the labels
Step 12
and cabinet cover. See the callout in
a.
b.
c.
OL-24695-01
Attach the compliance label to the inside left of the cabinet.
Attach the codec cabling diagram to the inside of the cable cover.
Attach the cabinet cover to the system.
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
Figure 2-15.
Assembling the TX1300 47
2-17