Download Print this page

Cisco TX1300 47 Manual page 2

Telepresence system, freestanding version

Advertisement

Assembling the TX1300 47
Assembling the TX1300 47
To assemble the TX1300 47, complete the following steps:
Step 1
Take an inventory of the parts in the shipping carton.
Figure 2-1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
2-2
Chapter 2
shows the carton contents:
Accessory kit (CTS1300-47ACCKIT)
Base (CTS1300-47BASEPED or CTS1300-47BASETETH)
Cabinet (CTS1300-47CABEXTR)
Display (CTS-DISP-47-GEN1)
Camera (CTS1300-47CAMCLST)
Codec (CTS-CODEC-PRI-G2R)
Speaker cover (CTS1300-47SPKCOV)
Light reflector (CTS1300-47AV-PNL)
Microphone (CTS-MIC)
Microphone (CTS-MIC)
Microphone (CTS-MIC)
Cisco TelePresence Touch 12 (CTS-CTRL-DV12-A)
Cabinet cover (CTS1300-47CABCOV)
Seat alignment guides (CTS1300-SAG)
Cable cover (CTS1300-47ACCKIT)
Audio/visual (A/V) panel cover (CTS1300-47AV-CVR)
Camera targets and easel (CTS-CAM-TOOL-G2)
Not used for this configuration (wall-mounted systems only)
Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
OL-24695-01

Advertisement

loading