Advertisement
Chapter 2
Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
Assembling the TX1300 47
Step 2
Remove the base from its packaging, and attach the feet to the base.
For a freestanding system, be sure to use the larger base with the shorter support posts. Compare this
with the base for the wall-mounted system shown in
Figure
3-2.
If the system is not level, use the wrench that is provided in the kit to adjust the base feet to level the base.
Tip
Figure 2-2
Attaching the Feet to the Base
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
2-4
OL-24695-01
Advertisement
