Scanner Unit; Fan Guard - Brother HL-600 Service Manual

3.7

Scanner Unit

(1) Disconnect the two connectors of the scanner unit from the driver PCB (Refer to 3.19).
(2) Remove the four screws.
(3) Lift out the scanner unit.
NOTE: Never touch the inside of the scanner unit or the mirror when disassembling or reassembling.
If there is any garbage or dust on the mirror, blow it off.
3.8

Fan Guard

(1) Remove the two screws securing the fan guard, and take it off.
Mirror
Fig. 3.9
Frame
Fan guard
Fig. 3.10
III - 7
Scanner unit
Sponge
Connectors