Siemens MD-BMS User Manual page 81

Appendix B - MD-BMS and MD-BMED Power Meters Modbus Absolute/Net Value Measurement Registers and
Modbus Offset
46015 6014 Positive Apparent PF System
46016 6015 Amps System Avg
46017 6016 Volts Line to Line Avg
46018 6017 Volts Line to Neutral Avg
46019 6018 Volts L1 to L2
46020 6019 Volts L2 to L3
46021 6020 Volts L3 to L1
46022 6021 Measured Line Frequency
46023 6022 Positive kWh L1 LSW
46024 6023 Positive kWh L1 MSW
46025 6024 Positive kWh L2 LSW
46026 6025 Positive kWh L2 MSW
46027 6026 Positive kWh L3 LSW
46028 6027 Positive kWh L3 MSW
46029 6028 Positive kW L1
46030 6029 Positive kW L2
46031 6030 Positive kW L3
46032 6031 Positive kVARh L1 LSW
46033 6032 Positive kVARh L1 MSW
46034 6033 Positive kVARh L2 LSW
46035 6034 Positive kVARh L2 MSW
46036 6035 Positive kVARh L3 LSW
46037 6036 Positive kVARh L3 MSW
46038 6037 Positive kVAR L1
Building Technologies
Register
contain that value; otherwise, it will be zero).
System Positive Apparent Power Factor (aPF);
Register is 100x actual value (If the System aPF
(44015) is positive, this register will contain that
value; otherwise, it will be zero).
Average of the current in all phases.
Average of the system line to line voltages.
Average of the system line to neutral voltages.
Individual phase to phase voltages
Line frequency x 10 (e.g., 602 = 60.2 Hz). On
startup, 20 point averaging array is filled with first
frequency read.
Individual Phase Positive True Energy LSW (kWh,
resettable)
Individual Phase Positive True Energy MSW
(kWh, resettable)
Individual Phase Instantaneous Positive True
Powers (kW)
Individual Phase Positive Reactive Energy LSW
(kVARh, resettable)
Individual Phase Positive Reactive Energy MSW
(kVARh, resettable)
Individual Phase Positive Instantaneous Reactive
Powers (kVAR)
Protocol Commands
Description
"
"
"
"
"
"
"
"
"
"
"
"
Appendices
81
125-202
06/06/2017