Table of Contents
Advertisement
5
Connecting PMC Network Interface Cards
To connect directly to a host, use an RJ-45 crossover cable wired as
shows.
Figure 19 Ethernet Crossover Cable Pin Connections
Note
After you turn on the appliance, the Ethernet link LEDs on both the
appliance and on the remote equipment illuminate to indicate the
connection. As data is transmitted or received, the activity LEDs on the
appliance illuminate.
To connect the 500s appliance to other network components, you can order
appropriate adapter cables separately from a cable vendor of your choice.
78
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
00017.1
Figure 19
Nokia 500s Installation Guide
Advertisement
Table of Contents
