Table of Contents
Advertisement
5
Connecting PMC Network Interface Cards
Figure 17 Dual-Port Copper Gigabit Ethernet NIC Front Panel Details
Link LEDs (green or yellow)
Activity LEDs (yellow)
\
After the power is turned on and the cables are connected, the Ethernet link
LEDs on both the 500s appliance and on the remote equipment illuminate to
indicate the connection.
Note
The Link LED on the NIC is bicolored. A green LED indicates a 1 Gbps
link speed, and a yellow LED indicates a 10/100 Mbps link speed. As the
NIC transmits data, the activity LEDs on the appliance illuminate.
Dual-Port Copper Gigabit Ethernet NIC Connectors
and Cables
The 500s appliance receptacles are RJ45 connectors.
To connect to a 1-Gbps hub, switch, or router, use a straight-through RJ-45
cable (Category 5 type cable, or as required by your network configuration).
76
1
2
1
Ports
Nokia 500s Installation Guide
2
00386.1
Advertisement
Table of Contents
