Nokia 500s Installation Manual page 103

To replace a hard disk drive by using the hot-swap feature
Note
You must have disk mirroring implemented to use the hot swap feature.
1. Locate the hard disk drive to remove.
2. Loosen the retaining screws on both sides of the hard disk drive.
Caution
3. Press the recessed hot swap button located on the front of the hard disk
Nokia 500s Installation Guide
To avoid damage to the ejection lever, loosen the retaining screw
behind each ejection lever before you remove the hard disk drive.
drive to disable the hard disk drive.
The status LED blinks.
Replacing a Hard Disk drive
103