Front View Camera Settings; Changing Boot Logo - Gazer CM60 Series User Manual

Gazer multimedia system allows connecting a front view camera.
To enable the front view camera display, do the following:
• Open «Settings» – «Factory settings».
• Use the on-screen keyboard to enter the password («121212» by default).
• Open «Other» tab.
• Select «On» in the «Front Camera» menu item.
• Press «APPLY» and then «EXIT».
Note. When the front-view camera is on, a new F-Cam app will appear in the installed apps list. It will allow watching
video feed from front- and rear view cameras, provided they draw power from a constant power source.
One can also use the «Switch to front camera after reverse» menu item to confi gure the front view camera on time (from 1
to 10 sec.) after the rear-view camera is turned off .
To change the multimedia system boot logo, do as follows:
• Open «Settings» – «Factory settings».
• Use the on-screen keyboard to enter the password («121212» by default).
• Open «Car Logo» tab.
• Choose the appropriate logo.
• Press «APPLY» and then «EXIT».
• Press «OK» in the restart warning window.
• The changes will take effect after the system is restarted.
Caution! To avoid malfunctions, we do not recommend changing any other system settings.

Front View Camera Settings

Changing Boot Logo

ENG
31