Table of Contents
Advertisement
Quick Links
Compatible with Audi vehicles with MMI Navigation Plus based on MIB
Bentley vehicles with MIB with 8" monitor
Lamborghini vehicles with MIB with monitor in instrument
Seat vehicles with Media System Plus - MIB High/Standard
Skoda vehicles with MIB STD2 PQ/+NAV, Amundsen and Bolero
VW vehicles with MIB/MIB2/MQB High/Discovery Pro and
Video-inserter for front and rear-view camera and one more video input
Product features
Video-inserter for factory-infotainment monitors
Back- and front camera CVBS Input
CVBS Video-Input for after-market Video sources (e.g. DVD-Player, DVB-T Tuner, ...)
Automatic switching to rear-view camera input on engagement of the reverse gear
Manual switching to front camera by keypad or factory button
Activatable parking guide lines for rear-view camera (vehicle specific restrictions
possible)
Video-in-motion (ONLY for connected video-sources)
Compatible with factory rear-view camera
AV-inputs PAL/NTSC compatible
Version 17:11.2017
All manuals and user guides at all-guides.com
MIB-4
Porsche vehicles with PCM 4.0
Standard/Composition Media
HW:CAM(V82)GD
RL3-MIB4
Advertisement
Table of Contents
Related Manuals for Gazer MIB-4
Summary of Contents for Gazer MIB-4
- Page 1 All manuals and user guides at all-guides.com MIB-4 Compatible with Audi vehicles with MMI Navigation Plus based on MIB Bentley vehicles with MIB with 8“ monitor Lamborghini vehicles with MIB with monitor in instrument Porsche vehicles with PCM 4.0 Seat vehicles with Media System Plus - MIB High/Standard...
-
Page 2: Table Of Contents
Case 2: CAN-box does not receive the reverse gear signal 2.6. Connecting video-interface and keypad 2.7. Picture settings and guide lines 3. Interface operation 3.1. By factory infotainment button 3.2. By keypad 4. Specifications 5. FAQ – Trouble Shooting-Interface functions 6. Technical support Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 3: Prior To Installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. 1.1. Delivery contents Take down the serial number of the interface and store this manual for support purposes: ____________________ Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 4: Checking The Compatibility Of Vehicle And Accessories
FM-modulator can be used. Factory rear-view camera Automatically switching-back from inserted video to factory rear-view camera is only possible while the reverse gear is engaged. To delay the switch-back an additional electronic part is required. Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 5: Boxes And Connectors
Try all 6 possible combinations of Dips 6, 7 and 8 to Monitor receive the best picture (quality and size) or see chapter adjustment “Monitor adjustment (Dip 6-8)” See the following chapters for detailed information. Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 6: Rear-View Camera Setting (Dip 5)
8“ VW Golf7 5.8“ 7“ Audi A3 (8V) 5.8“ 8.3“ Audi A4 (8W), A5 (8T) 7“ Audi A6/A7 (4G) 8“ Audi Q7 (4M) Touch 8.3“ Audi Q7 (4M) MMI 7“ Porsche VW Touran Audi TT (8S) Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 7: Settings Of The 4 Dip Switches (Can Function - Red)
If the necessary stabilized power supply for the interface is not taken directly from the battery, the chosen connection has to be checked for being constantly stabile. The interface needs a permanent 12V source! 2.1. Place of installation The interface is built to be connected behind the vehicle`s head-unit. Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 8: Connection Schema
All manuals and user guides at all-guides.com 2.2. Connection schema Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... - Page 9 12pin connector of the PNP harness. Clip in the female 12pin connector of the PNP harness in the previously become free position of the female Quadlock connector before finishing the Quadlock reconnection at the rear of the head-unit Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4...
-
Page 10: Connection And Power Supply For The Video Interface
Connect the single, black wire “GND” of the PNP harness to the vehicle’s negative ground. In case of a missing CAN communication between the vehicle and the interface, the single, white-black wire of the 20pin interface cable has to be connected additionately to a stabile +12V accessory power supply. Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 11: Connecting Of Video-Sources
“camera IN” of the 20pin interface cable (refer also to chapter “Video signal connection of the rear-view camera”) Connect the video RCA of the AV source to the female RCA connector ”Video IN 2” of the 20pin interface cable. Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 12: Audio Insertion
“Camera IN” while the reverse gear is engaged. Additionally, the +12V (max. 500mA) power supply for the rear-view camera can be taken from the green wire of the 20pin connection cable. Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 13: Case 2: Can-Box Does Not Receive The Reverse Gear Signal
(86) of the relay. Connect the output connector (87) of the relay to the rear-view camera’s power- cable, like you did it to the green “Reverse-IN” cable before. Connect permanent power / 12V to the relay’s input connector (30). Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 14: Connecting Video-Interface And Keypad
All manuals and user guides at all-guides.com 2.6. Connecting video-interface and keypad Connect the female 4pin connector of the keypad to the male 4pin connector of the 20pin interface cable. Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 15: Picture Settings And Guide Lines
Note: If there is no communication between the CAN box and the vehicle`s CAN-bus (several vehicles aren’t compatible), the reverse gear guide-lines can`t be shown during the vehicle’s operation, even if they once appear after having switched the system to powerless! Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 16: Interface Operation
0.3A @12V Video input 0.7V - 1V Video input formats PAL/NTSC RGB-video amplitude 0.7V with 75 Ohm impedance Temperature range -40°C to +85°C Dimensions video-box 122 x 22 x 85 mm (W x H x D) Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... -
Page 17: Faq - Trouble Shooting-Interface Functions
Camera input picture fluorescent light which shines Test camera under natural light outside the garage. flickers. directly into the camera. Camera input picture is Protection sticker not Remove protection sticker from lens. bluish. removed from camera lens. Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4... - Page 18 Cut the grey wire of 6pin to 8pin and isolate both Interface switches compatibility to vehicle is ends. If problem still occurs, additionally cut the white video-sources by itself. limited. wire of 6pin to 8pin cable and isolate both ends. 10R-03 5384 Version 17.11.2017 HW:CAM(V82)GD RL3-MIB-4...