Advertisement
Quick Links
Advertisement
Related Manuals for Gazer VI700A-NTG45
Summary of Contents for Gazer VI700A-NTG45
- Page 1 Gazer VI700A-NTG45 and VI700W-NTG45 INSTALLATION MANUAL...
-
Page 2: Table Of Contents
Contents List of compatible cars with preinstalled stock Mercedes Command Online NTG 4.5 and Mercedes Audio 20 NTG 4.5 multimedia interfaces ................ 3 Package contents ............................. 4 Mounting and connection ........................6 Special information ..........................7 Car interior disassembly and connection guide for Mercedes ML ........... 10 Troubleshooting ............................. - Page 3 We congratulate you on purchasing Gazer VI700 multimedia interface. Please, read this manual carefully before using the product. Precautions 1. To install and connect the product without voiding your vehicle warranty, please contact an authorized service station. 2. The car battery must remain disconnected during the entire installation procedure.
-
Page 4: Mercedes Audio 20 Ntg 4.5 Multimedia Interfaces
List of compatible cars with preinstalled stock Mercedes Command Online NTG 4.5 and Mercedes Audio 20 NTG 4.5 multimedia interfaces ‐ class (W176) 07.2012-08.2015 ‐ class (W246) 11.2011-10.2014 ‐ class (W204) 03.2014-2015 class Coupé (C204) 06.2011-2015 ‐ Coupé (C117) 01.2013-09.2014 ‐... -
Page 5: Package Contents
Package contents Central unit Power and CAN bus connection cables Stock monitor connection cable Video-in cable Audio-in/out cable Remote mode switching button CAN bus signal processing unit 16GB Gazer micro SDHC memory card GPS antenna Microphone... - Page 6 Remote cable with a USB port Touch panel connection cable Touch panel (optional) Power cable AUX cable Cable for connection to a standard AUX input port and a separate speaker Remote speaker User manual Warranty card...
-
Page 7: Mounting And Connection
Mounting and connection Installation tips: ” Before installing the video interface, please disconnect the “– terminal from the car battery. To install the video interface, use only the cables that come in the package. Make sure that there are no electronic devices or magnets near the central unit mounting location. -
Page 8: Special Information
Special information Video interface connection The product supports Plug&Play ("jack-to-jack”) connection LVDS cable between the stock multimedia system and the monitor. Note. Video interface is connected without damaging stock wiring and there is no need to modify stock ” cables and jacks. To control the video interface, one needs to install an optional 7 touch panel (glass\plastic). - Page 9 Display configuration buttons on the lower panel There are “Menu”, “+”, and “–” buttons on the video interface lower panel that one can use to configure how the image from the video interface will be displayed. To access the image settings menu, press and hold “Menu"...
- Page 10 Once the calibration procedure is complete, press Android logo (for Gazer VI700A-PCM31 model) or OK button (for Gazer VI700W-PCM31 model). Caution! If the SD card slot is empty or DIP switch No. 6 is set to "On", the touch panel calibration procedure will have to be repeated on every startup.
-
Page 11: Car Interior Disassembly And Connection Guide For Mercedes Ml
Car interior disassembly and connection guide for Mercedes ML Turn the ignition off. “ ” “ ” Use hook tool to loosen the upper edge of N22/7 automatic climate control panel. “ ” “ ” Use long wedge tool to loosen the lower edge of N22/7 automatic climate control panel and... - Page 12 Remove “N22/7” automatic climate control panel. Unscrew bolts “2”. Move retainers “3” all the way down. Pull audio module “А2” and COMAND “А40/3” control and indication panel out of the dashboard to ensure free access to electric plug-in connectors and the fiber optic cable socket connector. ...
- Page 13 “ ”. Unscrew bolts Pull COMAND A40/8 audio system display out of the upper dashboard section to ensure free “ ” access to electric wires “ ” Detach electric wires Remove COMAND A40/8 audio system display. ...
- Page 14 “ ” Unscrew bolts “ ” Open glove compartment “ ” Unscrew bolts on the side edge. “ ” “ ” Unscrew bolts in glove compartment “ ” Keep carefully pulling glove compartment out until electric plug-in connectors are accessible. ...
- Page 15 Install the remote microphone in the ceiling panel securing it with plastic ties to the main wiring harness. Place the remote GPS antenna in the B-pillar bottom-left corner and secure it with 3М adhesive tape. “ ” “ ”...
- Page 16 One needs to disassemble the display for touch panel installation. There are several display size options for these multimedia systems. To select the correct touch panel, one needs to measure the display size in inches and then find a matching touch panel. The touch panel is installed between the plastic panel and the display image sensor.
-
Page 17: Troubleshooting
Troubleshooting Malfunction Cause Possible solution No image/ black Not all plugs have been connected to the stock head Connect the remaining screen unit or monitor after installation. plugs. (manufacturer No power supplied to CAN unit (not all CAN unit Check CAN unit power image). - Page 18 Distorted camera feed. Unable to configure Camera image configuration is available in AV2 Set video interface DIP the backup camera mode only. 3 switch to ON (if AV2 image. input is not activated yet) and connect the camera to AV2. Then switch to AV2 and configure the image parameters.