Front View Camera Settings; Changing Boot Logo - Gazer CM50-100 User Manual

Gazer multimedia system allows connecting a front view camera.
ENG
To enable front view camera display, do the following:
• Open "Settings" – "Factory settings".
• Use the on-screen keyboard to enter the password ("301530" by default).
• Open "Other" tab.
• Select "On" in the "Front Camera" menu item.
• Press "APPLY" and then "EXIT".
• Press "OK" in the restart warning window.
• The changes will take effect after the system restarts.
Note.
When the front view camera is on, a new F-Cam app will appear in the installed apps list. It will allow watching
video feed from front and rear view cameras, provided they draw power from a constant power source.
One can also use the "Switch to front camera after reverse" menu item to configure the front view camera on time (from 1 to
10 sec.) after the rear view camera is turned off.
To change the multimedia system boot logo, do as follows:
• Open "Settings" – "Factory settings".
• Use the on-screen keyboard to enter the password ("301530" by default).
• Open "Car Logo" tab.
• Choose the appropriate logo.
• Press "APPLY" and then "EXIT".
• Press "OK" in the restart warning window.
• The changes will take effect after the system restarts.
Caution! To avoid malfunctions, we do not recommend changing any other system settings.
30

Front view camera settings

Changing boot logo