Mirrorlink Wi-Fi - Gazer CM60 Series User Manual

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
For MirrorLink function to work via Wi-Fi, both devices (the multimedia system and the Android mobile device) must be con-
nected to the same Wi-Fi network. There are several ways to do that:
1.
By connecting both devices (a mobile device and the multimedia system) to the same Wi-Fi network (home network,
public network, Wi-Fi network of mobile 3G router, etc.).
2.
By creating a Wi-Fi network on a mobile device and connecting the multimedia system to it.
3.
By creating a Wi-Fi network on the multimedia system and connecting a mobile device to it.
To setup a Wi-Fi network on the multimedia system or an Android mobile device, do as follows:
Open «Settings» – «Tethering & portable hotspot».
Enable the «Wi-Fi hotspot» option.
Note.
Use the «Set up Wi-Fi hotspot» item of this menu to change the access password and the name of the newly
created network.
When this function is used for the fi rst time, one needs to connect the mobile device with a USB cable and enable the «USB
debugging» function. See MirrorLink USB item of this guide for a detailed description of the procedure.
Once both the devices (the multimedia system and the Android mobile device) are connected within a single Wi-Fi network,
one can proceed to enabling MirrorLink function.
To do this, follow the steps below:
Open EasyСonnected app available in the list of installed apps.
Select «Android WiFi» option.
Use a USB cable to connect the mobile device to the multimedia system.
Confi rm the connection on the mobile device.
Disconnect the USB cable after the successful connection when «Disconnect the USB cable» message appears on the
screen.
Note.
Connection with a USB cable is required only when MirrorLink Wi-Fi function is used for the fi rst time. After that,
the devices will only need to be connected to the same Wi-Fi network.
AirPlay and MirrorLink Functions

MirrorLink Wi-Fi

ENG
23

Advertisement

Table of Contents
loading

Table of Contents