OPTO 22 GROOV BOX User Manual page 61

USING A CA-SIGNED CERTIFICATE ON GROOV BOX
4. Under "Certificate text" click "Entered below," then click Browse and specify the file containing
5. If your CA used intermediate CA certificates, they should all be contained in a single file. (If you
6. Click Save to complete the process.
7. To verify the certificate was installed correctly, use a browser to access the groov Box using the
54
groov Box User's Guide
the signed certificate that was obtained from the CA.
are not sure if your CA used intermediate CA certificates, ask your CA.)
For example, if you obtained your signed certificate from StartSSL™, the certificate was
downloaded to a file named sub.class1.server.ca.pem.
a. Under "Chained certificate text," select "Entered below."
b. Click Browse and specify the file containing all the intermediate CA certificates in the
certificate chain between your certificate and the root CA certificate. For a StartSSL class 1
free certificate this is sub.class1.server.ca.pem.
The browser pauses for a few seconds while the certificates are applied to the groov box. When
the certificates have been installed successfully, a confirmation message appears.
hostname specified on the certificate. If the browser does not generate an untrusted site
warning, the certificate was installed correctly.