OPTO 22 GROOV BOX User Manual page 41

RESTARTING THE GROOV BOX
In the left navigation bar, choose System > Restart groov and then click the Restart groov Box
button.
If you've updated but not restarted the Box, click System Information, and then click "Click here
to restart now."
Hardware restart: Press the On/Off button briefly and wait for the groov Box to turn off. Then
briefly press the On/Off button again to power it back up.
During a restart, you'll notice that the LED lights on the groov Box go off and then come back on. You
and your users will be able to use groov View and groov Build once the groov Box has fully restarted
and the SYS LED has stopped flashing.
34
groov Box User's Guide