OPTO 22 GROOV BOX User Manual page 51

USING A SELF-SIGNED CERTIFICATE
5. Copy the private key portion of text and paste it to a file named <server name>-key.pem
6. IMPORTANT: Before proceeding, wait for the SYS LED on the groov Box to stop blinking green,
44
groov Box User's Guide
groov Admin displays all of these together.
At this point, the new certificate is installed on the groov Box and network services restarts.
(where <server name> is replaced by the server name value you entered on the Create SSL key
form.) This is the private key that was installed on the groov Box in the previous step.
NOTE: Do not lose the private key. You must keep a copy of it to restore later in case you commission a
replacement groov Box or have to restore the Box to factory defaults.
then make sure to refresh your browser.