Error Codes And Troubleshooting - aventon PACE 500 Owner's Manual

ERROR CODES AND TROUBLESHOOTING

In the event of a problem with the electrical components of your
bike, the display will show an error code. Compare the code with
this list below and HOW TO RESOLVE:
CODE ERROR
Communication
30
Current
21
Throttle
22
Motor Phase
23
PACE 500 OWNER'S MANUAL
Poor connection between the controller
and the display, check all cable
Error
connections.
Check the cable that connects the
rear hub motor to the rest of the
Error
system. Make sure it is free from grit or
contaminants and is firmly connected.
When you press and release the throttle,
it should return to the original position.
Remove any obstructions. Check the
Error
throttle and throttle cable for damage,
such as a cut or frayed cable.
Check the cable that connects the rear
hub motor to the rest of the system
and make sure it is free from grit or
contaminants and is firmly connected.
This error might appear if you don't
reconnect the cable after removing the
Error
rear wheel (for example, after changing
a flat tire, or transporting your bike in the
trunk of a car). At least one of the motor
phase wires has been damaged or is
temporarily disconnected.
HOW TO RESOLVE
9