Clearing Lcd Error Messages - Samsung Laser MFP SCX-4100 User Manual

Display
Door Open
[JAM 1] or
[No Cartridge]
Low Heat Error
Open Heat Error
[Over Heat]
[LSU Error]
No Paper
[Add Paper]
Paper Jam 0
Open/Close Door
Paper Jam 1
Open/Close Door
Paper Jam 2
Check Inside
8.8
T
ROUBLESHOOTING

Clearing LCD Error Messages

Messages appears on the display to indicate the control panel to
indicate the machine's status or errors. Refer to the following
table to understand the message's meaning and correct the
problem, if necessary. Messages and their meanings are listed
in alphabetical order.
Meaning
The front or rear cover is not
securely latched.
The toner cartrige is not
installed.
There is a problem in the
fuser unit.
A problem has occurred in
the LSU (Laser Scanning
Unit).
The paper tray has run out
of paper.
Paper has jammed in the
feeding area of the paper
tray.
• Paper has jammed in the
fuser area.
• A paper jam has occurred
in the manual feeder or
the machine detects non-
feeding from the manual
feeder.
Paper has jammed in the
paper exit area.
Suggested solutions
Close the cover until it locks
into place.
Install the toner cartridge. See
.
page 1.6
Unplug the power cord and
plug it back in. If the problem
persists, please call for
service.
Unplug the power cord and
plug it back in. If the problem
persists, please call for
service.
Load paper in the paper tray.
See page 1.8.
Clear the jam. See page 8.2.
• Clear the jam. See page 8.5.
• Clear the jam. See page 8.6
Clear the jam. See page 8.3.