Scope Of Delivery; Assembling Your Weighing Machine - Tree LWC 800 Operating Manual

Wheelchair scale
Table of Contents

Advertisement

Check the weighing machine immediately after unpacking for
externally visible damage. If you should find transport damage, please
inform your service representative immediately.
If the machine is not to be used immediately after purchase but only at
a later time, it should be stored in a dry place where fluctuations in
temperature are as small as possible (see Chapter 7 .Transport,
storage.).
Read through these operating instructions; even if you already have
prior experience with weighing equipment, before you work with the
unit and pay attention to the Safety recommendations (see Chapter 1
.Safety).

3.2 Scope of delivery

Inspect delivery for completeness immediately on unpacking all components.
Checklist for complete delivery
Weighing Machine
Folding Handle
Indicator
(4) Screws / (4) butterfly Nuts
Power adapter
Operating manual

3.3 Assembling your weighing machine

The weighing machine is delivered in partly dismantled condition. Assemble
the individual components in the following sequence:
Place your machine on a level, stable, clean, dry surface to obtain
accurate readings.
Loosen the screw on the handle.
Pull the column upward to a 90 degree angle.
Insert the column into the slot and screw into place.
Fix the indicator bracket to the column with screw and nut.
Connect the power cord to the indicator.
Component delivered present
yes / no
15

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LWC 800 and is the answer not in the manual?

Table of Contents