Input - Uchida Yoko AeroCut nano+ Operation Manual

2.3 Input

① Enter the cut pattern.
② Enter the number of sheets for operation.
All the sheets on the feed table will feed in case 0 is entered in Qty.
③ Touch the screen to have
When it is on, the machine register the cut-mark and cross cuts at proper positions
even the image is drifted.
Note.
Cut-mark sensor detects the black mark by infrared light.
Some types of toner or ink may reflect the infrared light and cause the sensor not
reading the cut-mark. Please inactivate the cut-mark registration in such cases.
AeroCut nano+ OPERATION MANUAL
Page. 15
Home screen
Home screen
Home screen
9
to activate cut-mark registration.