Flex Mode - Uchida Yoko AeroCut nano+ Operation Manual

3.4 FLEX MODE

① Press FLEX MODE.
② FLEX mode is an operation mode where you can input up to 20 actions per page.
This allows the machine to finish jobs which MANU SET cannot finish, such as
multiple sizes of cards from a page and pass through pages without any actions.
③ Press the number to change the value.
FLEX MODE screen
Cut-mark
Position
Pitch
Operation switching
：No operation
：Guillotine
AeroCut nano+ OPERATION MANUAL
Home screen
Paper size
18
Back margin size
Pressing switch copies
the No. 1 pitch and
its relevant operation
to No.2 to No.20 pitches.
Next Page.
Next Page.