Table of Contents
Advertisement
6 Error messages
1.
2.
3.
4.
5.
AeroCut nano+ OPERATION MANUAL
Safety cover (
open.
Make sure to close the Safety cover
closed.
Timeout error 1
Paper was not fed within a set time
period.
Check the paper feeder.
Timeout error 2
Paper did not pass through within a set
time period.
Remove the paper remaining inside the
machine.
Check the paper or paper path.
Cutmark was unable to be detected.
Check the cut mark.
Eject the paper inside the machine.
Note.
Cut-mark sensor detects the black mark
by infrared light. Some types of toner
or ink may reflect the infrared light and
cause the sensor not reading the
cut-mark. Please inactivate the cut-mark
registration in such cases.
29
Page.5) might be
Advertisement
Table of Contents
