Speed Change; Skew Adjustment - Uchida Yoko AeroCut nano+ Operation Manual

4.2 Speed change

SPEED screen
・In case of finishing thick paper, slow down the speed.
・If finished sizes are inaccurate or inconsistent, there is a possibility that the running
speed is too fast. Slow down the speed.
・Note.
The reference of the paper thickness and speed.

4.3 Skew adjustment

・If print is skew on the sheet, the angle of the side guide can be adjusted.
・The angle of the side guide changes as the skew adjustment dial is turned.
Set the sheets again.
AeroCut nano+ OPERATION MANUAL
Slow
- 0.006" (0.15mm)
0.006" - 0.01"(0.25mm)
0.01" -
Page. 11
26
Fast
4
3
2
Skew adjustment
dial
Side guide