Start; Stop; Waste Disposal - Uchida Yoko AeroCut nano+ Operation Manual

2.7 Start

・ After processing the entered number of sheets in
automatically.
・Do not open the Safety cover (
stop immediately.

2.8 Stop

・ Press STOP and the machine will make an EMERGENCY stop even if the
operation is underway.
・ Press END if you wish to stop the
machine when the current sheet is
completed.
・ The counter indicates the number of
finished sheet when the machine is
stopped with STOP or END button.
Press
0.
・ If paper is left in the machine, remove it by inching. (

2.9 Waste disposal

・Dispose the wastes in the waste box appropriately.
・Overloading wastes causes errors or a breakdown.
AeroCut nano+ OPERATION MANUAL
Home screen
Page. 5) while the machine is running. Machine will
Home screen (While Running)
to reset the counter to
13
, the machine stops
Counter
Page. 28)
Waste box