Paper Setting - Uchida Yoko AeroCut nano+ Operation Manual

2.5 Paper setting

① Press the
( Page. 6) if the feed table is in upper position.
The feed table moves down to the lower dead point.
② Flip through the sheets well before you put them on the
feed table.
③ Set the sheets on the feed table. Use the paper guide
(Large) and paper guides (Small) to fix the sheets.
・Paper loading capacity is 1.2".
・Make sure that the paper stack does not
exceed the MAX label.
・It affects finishing accuracy if there is a
gap between the side guide and the
sheets.
・If the print is skew on the sheets, the angle of the side guide can be adjusted.
Page.26
AeroCut nano+ OPERATION MANUAL
button on the home screen
Paper guide (Large)
Paper
Warning
Don't put hands inside work area.
May result in severe injury.
11
Paper guide (Small)
Paper
Side guide
Gap
Skew
adjustment dial
Label