Adjustment; Adjustments On The Paper Feed Section - Uchida Yoko AeroCut nano+ Operation Manual

4 Adjustment

4.1 Adjustments on the paper feed section

・Adjustments are required when the machine is likely to feed double or skew.
Home screen
Manual control
④
⑥
① VACUUM
１ ２ ３
Reduce double feed
Double paper feeds may occur in case of feeding thin or low density papers. In such
cases, turn down the VACUUM.
Empty feed may occur in case of feeding heavy paper. In such a case, turn up the
VACUUM.
VACUUM will be turned off when the value is 0.
② LOWER BLOW
１ ２ ３
Reduce skew
BLOW – FRONT will be turned off when the value is 0.
AeroCut nano+ OPERATION MANUAL
screen
⑤
Default
４ ５ ６ ７
４ ５ ６ ７
SPEED screen
①
②
８ ９ １０
Easier to feed
Default
８ ９ １０
Reduce double feed
23
③