Feed Size Adjustment; Slit Position Adjustment; Cutting Location Adjustment (Guillotine) - Uchida Yoko AeroCut nano+ Operation Manual

4.4 Feed size adjustment

・Adjust through MANUSET screen.
Page. 16

4.5 Slit position adjustment

・Adjust the positions of the slitter heads
by moving the gauge (InstaSet bar).
・The gaps between the slitter heads are
not adjustable.

4.6 Cutting location adjustment (Guillotine)

Home screen
Between Cutmark and
1st cut. [inch]
Between paper edge and
1st cut. [inch]
Input balance between the entered value in MANUSET and the actual finished size.
i.e. MANUSET: 1.00", Actual size: 1.02" = Input -0.02"
AeroCut nano+ OPERATION MANUAL
Feed direction
ADJUST screen
Stretch or shrink
27
Slit position
MANUAL CONTROL screen
Reset to factory
settings.
Feed size
Slitter head
Gauge
(InstaSet bar)