Device Maintenance - ABB Orion 3 Base Original Instructions Manual

10 Device maintenance

Orion3 Base light grids do not require special maintenance operations.
To avoid the reduction of the operating distance, optic protective front surfaces must be cleaned at regular intervals.
Use soft cotton cloths damped in water. Do not apply too much pressure on the surface in order to avoid making it
opaque.
Do not use the following on plastic surfaces or on painted surfaces:

Alcohol or solvents

Wool or synthetic cloths

Paper or other abrasive materials
2TLC172289M0201 Rev C
2018-04-17
36 www.abb.com/jokabsafety