80 m m ( 3- 1/ 8" )
1.
3.
cords, leaving the ends temporarily hooked through a
notch on the side of the spool.
4.
Mount the spool in the housing so that the grooves
and protrusions on the spool match up with those in the
housing. Keep the side with letters on the spool visible
on the top. Now, unhook the ends of the cord from their
temporary position and feed the cords through the
eyelets to come out of the housing.
1.
2. Housing 3.
5.
Align the protrusion on the underside of the cover
onto the housing to secure it.
100 mm (3-15/16")
1
2
3
1
Replacing the plastic blade
Replace the blade if it is worn out or broken.
the arrow on the blade with that of the protector.
1
1. Arrow on the protector 2. Arrow on the blade
Centers, always using Makita replacement parts.
17 ENGLISH
2