Mounting The Attachment Pipe; Installing The Guard - Makita DUR187U Instruction Manual

2
3
1. Grip 2. 3. Handle
2. Place handle between handle clamp and handle
socket head bolts.
1
1.

Mounting the attachment pipe

For DUR188U and DUR188L only
Mount the attachment pipe to the power unit.
1. Turn the lever to the direction of the arrow shown
1. Lever
2.
pipe while aligning the protrusion on the pipe (cutting
1
2
2. Handle clamp
1
1. Lock lever 2. Joint cover 3. Pipe
Make sure that the surface of the lock lever is parallel
to the pipe.
3. Turn the lever to the direction of the arrow shown
1. Lever
To remove the pipe, turn the lever to the direction of the
pressing down the lock lever.
1
1. Lever 2. Lock lever 3. Pipe

Installing the guard

WARNING:
guard illustrated in place. Failure to do so can
CAUTION:
Take care not to injure yourself on
the cutter for cutting the nylon cord.
11 ENGLISH
1
2
1
Never use the tool without the
3
2
3