ART S07687
CAR BODY REPAIR WELDING SYSTEM
INSTALLATION, USE, MAINTENANCE, SPARE PARTS
•
Introduction
•
Symbols
•
Art. 338672.S1 Pneumatic gun
•
Standard accessories
•
Selection of arms, electrodes and accessories
•
Item S07687 Welding system
•
Dimension and weight
•
Unpacking
•
Installation
•
Electrical installation
•
Pneumatic installation
•
Safety rules
•
Self contained welding system description
Welding control unit
•
Main features
•
Multifunction gun (Item 338075)
•
Pneumatic gun (item 338672.S1)
•
Work
•
Welding examples
•
Possible combinations for using the tools
•
Welder set-up
•
Ordinary maintenance
•
General warnings
•
Electrodes
•
Pneumatic circuit
•
Extraordinary maintenance
•
Welder non-working
•
Lowering of the performance
•
Electric circuit
•
Tables for performances and adjustments
•
Faults - Causes – Diagnoses
•
Wiring diagram
•
Exploded view item S07687
•
Spare parts list
•
Exploded view item 338672.S1
•
Spare part list
•
Declaration of conformity
INTRODUCTION
CAREFULLY READ THIS MANUAL BEFORE INSTALLING AND OPERATING WELDER.
This manual is addressed to the factory responsible in charge that must release it to the personnel in charge of
welder installation, use and maintenance. He/she must check that the information given in this manual and in the
enclosed documents have been read and understood. The manual must be stored in a well-known place; easy to reach,
and must be looked up each time even little doubts should arise.
These welders must be installed in industrial environments for professional use, only.
WARNING: Resistance welding equipment is not intended to be used on a low-voltage public network that supplies
domestic premises: it may cause radio frequency interference.
GB
1