8
When the message "Do you want to retrieve the device information?" is displayed,
click [Yes].
If the information is retrieved, the option structure is set automatically. Check the settings.
If the information is not retrieved, set the options manually. Select the options attached to the device.
9
Click [OK].
NOTE
●
When installing a driver by discovering the corresponding device on a network, some of the device
information may not be obtainable if WSD communication is disabled. If this is the case, you can correctly
acquire device information by performing the above procedure.
●
In any of the following cases, some of the device information may not be obtainable. If this is the case, set
the options manually.
-
When the device is connected by USB
-
When installing the driver by specifying a standard TCP/IP port
-
When using a device or port that cannot acquire device information
Related Topics
Installing by Discovering Devices on a Network(P. 19)
Changing Settings to Match the Usage Environment
54