Canon UFR II User Manual page 131

Adjusts the print data compression ratio when sending print data to the printer, and prints with priority given
to either image quality or print speed.
[Image compression optimization]
Sets an image compression method. You can select from an optimization method (switching between
reversible and irreversible) or a uniform compression method (no optimization). Compressing an image
using the optimization method suppresses JPEG block noise.
[Line control]
Improves reproduction of characters and lines.
[Resolution priority]: Gives priority to resolution.
[Gradation priority]: Gives priority to gradation.
[Prioritize printing of colored lines and text]
If colored lines or text are blurred or broken, they may print clearer if you enable this function.
If you have selected [Quality] sheet > [Content-Based Print] > [Line], this function is enabled by default.
[Color Adjustment]/[Grayscale Adjustment]
Enables you to adjust color, brightness, and contrast.
☞
[Color Adjustment]/[Grayscale Adjustment] Dialog Box
[Sample Type]
Specifies the type of image displayed in the sample preview.
If you select [Default], this is saved to print settings that match the type of data selected in [Elements to
Adjust] and the displayed image is also changed.
[Elements to Adjust]
Specifies an object as a color adjustment target.
[Apply to sample]
Applies the values set in [Saturation] and [Hue] sheets to the sample preview.
By switching the selection state, you can check how much the colors have changed.
[Color wheel]
Displays this as a guide when you adjust colors. This is displayed when the [Hue] sheet is selected.
[Saturation]/[Hue] Sheet
Enables you to adjust the saturation and hue of each color when printing in the [Color Adjustment] dialog
box. Adjust by dragging the slide bar or entering a numerical value.
[Adjust all colors using the same value]
Adjusts all colors simultaneously in the [Color Adjustment] dialog box.
[Brightness]/[Contrast]
Adjusts the brightness or contrast by dragging the slide bar or entering a numerical value.
[Matching Settings]
Enables you to set a matching operation for color adjustment.
☞
[Matching Settings] Dialog Box
[Matching Mode]
Specifies the processing method for color matching.
[Matching Method]
Specifies what factor is prioritized when matching. Depending on the device, you can select factors to be
prioritized for each subject.
When you click [Retrieve Matching Method Information], you can retrieve information about the matching
methods registered in the device.
[Gamma]/[Gamma Adjustment]
Enables you to print with gamma adjustment.
Settings List
127