Figure 44 - Communication - Netcom2P Or Netcom6P/Acu - Keyscan CA250B Technical Instructions

Figure 44 - Communication - NETCOM2P or NETCOM6P/ACU

Parts List
- PC
- 10/100 Base-T Cable
- Control Board
- NETCOM2P or NETCOM6P
Ensure S2
DIP switch 7 = ON
DIP switch 8 = OFF
Current Draw
ACU + NETCOMP = 270 mA
KI-00161E-04-13
Important
NETCOM2P or NETCOM6P plugged directly into the control board only supports a single panel
communication loop.
After installing and connecting the NETCOMP, ensure that the control board protective cover is re-affixed
before applying power.
Keyscan Inc. – Technical Guide (PC109x - 04.15)
Communication Manager
Control Board
(PC 109x)
Cut view with
ACU protective
cover removed.
NETCOMP plugs into M1 on
control board.
Common AUX Inputs - D Common
Host PC with
to network
IOCB (COM1)
RX
TX
CPB/CB MODULE
(COM4)
to network
10 or 100
Base-T
AUX Inputs - E
63