Level Dishmachine By Adjusting Leveling Legs; Press The "Fill/Start" Switch; Thermometer Needs To Be Installed - CMA Dishmachines EST-Front Loader Quick Setup Instructions

Model EST-Front Loader
Quick Setup
Instructions
WARNING: Electrical and
plumbing connections
need to be made by a
licensed service person
and comply with all
Federal, State and Local
Health, Electrical,
Plumbing and Safety
codes.
THERMOMETER NEEDS TO
BE INSTALLED:
The Model EST FRONT LOADER
is Shipped from CMA without
thermometer being installed. To
prevent leaking, the installation
Team will need to install it on the
dishwasher using TEFLON TAPE.
So the thermometer for this unit
is not misplaced during shipment,
please find thermometer shipped
inside the dishwasher, zip-tied
to the dishrack.
STEP
4

Level dishmachine by adjusting leveling legs.

Dishmachine must be level front and back to
ensure proper performance.
DETERGENT
SWITCH
PERISTALTIC
PUMP
STEP
5
Press the "FILL/START" switch. Hold in the
"FILL" position until the water overflows into
the scrap accumulator.
MODEL EST FRONT LOADER
FRONT VIEW
POLY PRO SCRAP
TM
ACCUMULATOR
an Ali Group Company
The Spirit of Excellence
SWITCH
SWITCH
SWITCH
FILL/START
SWITCH
CYCLE LIGHT
HANDLE
LEVELING
STEP
6
Open dishmachine doors completely. Closing
the door will automatically activate the
machine.
SANI
DRAIN
RINSE
5
DOOR
6
4
LEGS
11-2016