Considerations Before Installation; Environmental Considerations; Application Considerations - Emerson Rosemount 2110 Reference Manual

Configuration
March 2018
2.2

Considerations before installation

Important
Emerson
process parameters with the product, options, configuration or materials of construction selected.
2.2.1

Environmental considerations

The Rosemount 2110 Level Switch is a wired point level device for use in open or closed tanks, and
pipework. The installation must be in a non-hazardous (safe) area.
All versions of the level switch are weatherproof and protected against the ingress of dust, but must be
protected from flooding.
Hygienically-certified and compliant versions have specific hygienic installation instructions in the
Rosemount 2110
Avoid installing the level switch near heat sources.
Figure 2-1. Environmental Considerations
2.2.2

Application considerations

For most liquids, including coating, aerated liquids and slurries, the function is virtually unaffected by
flow, turbulence, bubbles, foam, vibration, solid particles, build-up, or properties of the liquid.
The Rosemount 2110 Level Switch ("level switch") is available for installation in non-hazardous (safe)
areas and process temperatures up to 302 °F (150 °C). It can be mounted in any position in the tank or
pipe using the
See Figure 1-2 on page 4
8
™
is not in a position to evaluate or guarantee the compatibility of the process fluid or other
Quick Start Guide
OK
/ - or 1-in. threaded or Tri Clamp fitting.
3
4
for application examples.
(see Emerson.com/Rosemount
OK
Reference Manual
00809-0100-4029, Rev CA
for other language versions).
Configuration