Table of Contents
Advertisement
Section 2 - Overview
Before Installation
Unpacking the Product
Before opening the product packaging, inspect the packaging
condition to assure that product was not damaged during delivery.
When opening the package, inspect that the product Tamper
Evident Labels are intact.
Important:
1. If the unit's enclosure appears disrupted or if all channel-
select LEDs flash continuously, please remove product
from service immediately and contact Technical Support
at:
http://www.emersonnetworkpower.com/en-
US/Support/Technical-
Support/InfrastructureManagement/Pages/default.aspx
2. Do not connect product to computing devices:
a. That are TEMPEST computers;
b. That include telecommunication equipment;
c. That include frame grabber video cards
d. That include special audio processing cards.
15
Where to locate the Product?
The enclosure of the product is designed for desktop or under the
table configurations. An optional Mount Kit is available.
Product must be located in a secure and well protected
environment to prevent potential attacker access.
Consider the following when deciding where to place product:
Product front panel must be visible to the user at all times.
The location of the computers in relation to the product and
the length of available cables (typically 1.8 m)
Warning: Avoid placing cables near fluorescent lights, air-
conditioning equipment, RF equipment or machines that create
electrical noise (e.g., vacuum cleaners).
2-PORT SINGLE-HEAD SECURE KVM
Advertisement
Table of Contents
