Product Recycling And Disposal - Emerson Rosemount 2110 Reference Manual

Reference Manual
00809-0100-4029, Rev CA
1.4

Product recycling and disposal

Recycling of equipment and packaging should be taken into consideration. The product and packaging
should be disposed of in accordance with local and national legislation.
Introduction
Pump protection or empty pipe detection
Short forks require minimum intrusion wetside and allow simple low cost installation at any
angle into pipes or vessels. Because the Rosemount 2110 projects only 2-in. (50 mm)
(depending on connection type), it can be installed in small diameter pipes. By selecting
the option of direct load switching electronics, it is ideal for reliable pump control and can
be used to protect against pumps running dry.
Pump control
Many processes have batching and header tanks with the need to control a pump to
maintain levels between set points. The Rosemount 2110 is ideal for these situations, since
these tanks are often manufactured from thin wall materials and cannot support the
weight of heavy instrumentation.
Leak detection
Flanges, gaskets, seals, corrosive liquids all have the potential to leak at the most
inconvenient times. Many users site tanks and vessels above trays, or in containments to
prevent any liquids from escaping. A level switch can quickly and accurately detect any
leakage, thereby eliminating costs.
Hygienic applications
The highly polished fork option provides a surface finish (Ra) better than
0.8 μm. The Rosemount 2110 meets the principle design criteria of the most stringent
hygienic requirements used in food and beverage, and pharmaceutical applications.
Manufactured in stainless steel, it is robust enough to easily withstand steam cleaning (CIP)
routines at temperatures up to 302 °F (150 °C).
Introduction
March 2018
5