PDi PD251-045 Installation Instructions

A Leader in Patient Communication
™
Solutions

SCOPE:

To install a bottom mount DVD bracket to a 32" wall mounted metal LED TV using a PDI wall mount kit (not
included).

TOOL LIST:

1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver

SAFETY STEPS:

1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.

SUPPLIED PARTS:

ITEM QTY PART NUMBER
1 4 PDIPPHMSM6X110
2 1 PD181-816
3 1 PDISEMSM3X55
4 1 PD106-776R
For PD168-051 Wall Bracket Kit

PROCEDURE:

STEP 1:

Attach the wall mounting plate (from separately purchased
kit) to the TV and secure with two PDIPPHMSM6X110 (1)
screws on the right side.

STEP 2:

This bracket is a new design. The DVD player must be securely attached to the bracket before
attaching the bracket to the TV assembly. The DVD player will fall if screw is not secured.
Slide DVD player (purchased separately) through tabs
on DVD mounting bracket PD181-816 (2) as shown.
Secure with PDISEMSM3X55 screw (3).
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
MODEL NUMBER:
PD251-045 Bottom Mount DVD Kit For
32" Metal LED TV
Installation Instructions
M6-1X10MM SCREW S
DVD MODULE BRACKET
M3-.5X5MM SCREW S
15 TO 26 PIN 36" RIGHT ANGLE
DVD
Document Number:
PD196-337R2
Page 1 of 3
DESCRIPTION
2
1
3