PDi PD251-028 Installation Instructions

Better Solutions Are Within Reach

Scope:

To install a bottom mount DVD bracket to a 42" wall mounted LED TV using a PD168-033 bracket kit (not
included)

Tool List:

1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver

Safety Steps:

1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.

Supplied Parts:

ITEM QTY PART NUMBER
1 1 PD181-770
2 1 PDISEMSM3X55
3 1 PD181-771
4 2 PDIPPHMSM4X76
5 1 PD106-776R

Procedure:

This bracket is a new design. The DVD player must be securely attached to the bracket
before attaching the bracket to the TV assembly. The DVD player will fall if not secured.

Step 1:

Slide DVD player (purchased separately) through tabs on DVD mounting bracket PD181-770 (1) as
shown. Secure with PDISEMSM3X55 screw (2).
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
MODEL NUMBER:
PD251-028 Bottom DVD Mount for 42"
®
Installation Instructions
DVD Module Bracket
M3-.5X5mm Screws
Adapter Bracket
M4-.7X6mm Screws
15 to 26 pin 36" cable
LED TV
DESCRIPTION
Document Number:
PD196-279R4
Page 1 of 2