PDi PD251-026 Installation Instructions

Your Source for Healthcare and
™
Wellness Infotainment

SCOPE:

To install a bottom mount DVD bracket to a 29" or 32" wall mounted LED TV using a PDI wall mount kit (not
included).

TOOL LIST:

1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver

SAFETY STEPS:

1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.

SUPPLIED PARTS:

ITEM QTY PART NUMBER
1 4 PD242-658
2 1 PD181-773
3 4 PDIPPHMSM6X125
4 1 PD181-770
5 1 PDISEMSM3X55
6 2 PDIPPHMSM4X76
7 1 PD106-776R
8 4 PDIPPHMSM5X825
Note: Items 3 or 8 will be used according to size of TV

PROCEDURE:

STEP 1:

Attach the wall mounting plate (from separately purchased
kit) to the TV placing four PD242-658 spacers (1) between
plate and TV. Secure with two PDIPPHMSM6X125 (3) or
PDIPPHMSM5X825 (8) screws on the right side. See
chart for appropriate sizes.

STEP 2:

Position PD181-773 DVD ADAPTER bracket (2) over
mounting plate and spacers on left side and attach with
remaining two screws as pictured. Tighten all four
PDIPPHMSM6X125 (32" TV) or PDIPPHMSM5X825 (29"
TV) mounting screws.

STEP 3:

This bracket is a new design. The DVD player must be securely attached to the bracket before
attaching the bracket to the TV assembly. The DVD player will fall if screw is not secured.
Slide DVD player (purchased separately) through tabs
on DVD mounting bracket PD181-770 (4) as shown.
Secure with PDISEMSM3X55 screw (5).
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
MODEL NUMBER:
PD251-026 Bottom Mount DVD Kit For
29" and 32" LED TV
Installation Instructions
NYLON SPACER
ADAPTER BRACKET
M6-1X25MM SCREWS FOR 32" TV
DVD MODULE BRACKET
M3-.5X5MM SCREWS
M4-.7X6MM SCREWS
15 TO 26 PIN 36"
M5-.8X25MM SCREWS FOR 29" TV
Document Number:
PD196-280R4
Page 1 of 2
DESCRIPTION