JUKI TL-2200QVP Instruction Manual page 15

6
7
8
1
2
Installing the thread stand
■
2
Turn OFF the power switch.
Always must be disconnected plug from socket-outlet.
1
1. Insert bobbin winder spool pin 2 into spool holder 1. Fix the
2. Set bobbin winder seat 4 and two anti-vibration cones 5 on
3. Set thread stand thread guide 6 on the top of bobbin winder
3
4. Install thread stand 7 on frame 9 with two setscrews 8.
5
4
9
Installing the thread guide
■
Turn OFF the power switch.
Always must be disconnected plug from socket-outlet.
Insert thread guide pin
to tension controller No. 1
the handle of screwdriver to prevent the pin from slipping off easily.
CAUTION
former with setscrew 3.
spool holder 1.
spool pin 2.
CAUTION
into the frame with the holes in the pin faced
1
2
– 14 –
. Pat the top of the thread guide pin with