To Set Or Release The Quick Mode; To Set Or Release The Toggle Mode For The Door Relay - Samsung SSA-S2000W User Manual

Standalone rfid access controller
Table of Contents

Advertisement

basic setup

TO SET OR RELEASE THE QUICK MODE

The QUICK mode is applicable to RF ONLY mode (01) and PIN ONLY mode (03) and RF/PIN combination mode (05),
which enables you to open the door by simply pressing
normal business hours when the door entries and exits occur frequently.)
1.
Present the Master Card to the device.
4
2.
Press Button
and Button
To release the QUICK mode, repeat Step 1 above, select the
4
4
<
> buttons and press
The default is set to "not used".

TO SET OR RELEASE THE TOGGLE MODE FOR THE DOOR RELAY

In the Toggle mode, the door opens if it is closed or vice versa by presenting a registered card or entering the PIN.
1.
Present the Master Card to the device.
4
2.
Press Button
and Button
To release the Toggle mode, repeat Step 1 above, select the
4
6
<
> buttons and press
The default is set to "not used".
28_ Basic Setup
without the need of the PIN number. (This is useful for the
ENT
3
in sequence and press
ENT
.
ENT
5
in sequence and press
ENT
.
ENT
.
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ssa-s2000

Table of Contents