Reader Mode Setup (Rf + P/W); Reader Mode Setup (Pin Only) - Samsung SSA-S2000W User Manual

READER MODE SETUP (RF + P/W)

No Master Card or Master PIN is ever registered.
If you remember the Master Card or the Master PIN was registered, initialize the product and try again.
1. When you turn on the product, all of the 3 LED indicators will fl ash with a beep.
•
No flashing of the 3 indicators denotes that the reader mode is already
specified.
0
2. Press Button and Button
3. Present a card that you want to register as the Master Card to the device.
When the Master Card is registered, only the red LED indicator flashes.
4. Present a card to the device, enter the 4-6 digit password and press
If you don't want to register the cards right now, simply jump to Step 5 above
without through Step 4 above.
5. Present the registered Master Card to the product once again.
6. The device enters Standby mode with only the orange LED indicator flashing.

READER MODE SETUP (PIN ONLY)

No Master Card or Master PIN is ever registered.
If you remember the Master Card or the Master PIN was registered, initialize the product and try again.
1. When you turn on the product, all of the 3 LED indicators will fl ash with a
beep.
•
No flashing of the 3 indicators denotes that the reader mode is already
specified.
0
2. Press Button and Button
When the mode is specified, only the green LED indicator flashes.
3. Enter the 4-6 digit Master PIN number and press
When the Master PIN is registered, only the red LED indicator flashes.
4. Enter a PIN number to register (4-6 digits) and press
Repeat the step above if you want to register PIN numbers with the device in sequence.
If you don't want to register the PIN number right now, simply jump to Step 5 above without through Step 4
above.
5. Enter the 4-6 digit Master PIN number again and press
6. The device enters Standby mode with only the orange LED indicator flashing.
2
in sequence and press
ENT
3
in sequence and press
ENT
.
ENT
.
ENT
.
.
ENT
.
English _ 19